Latest posts
2024-10-23
9:30 am
0 – Introduction
If you have some experience with the Ubuntu command line and want to save a little extra power on your homelab server, then switching from Ubuntu Desktop to Server might be a good...
2024-10-18
9:30 am
0 – Introduction
This small project will show you how to use an Esp32 to read the state of a button and output it to a LED, you should also be able to recreate this project with little to no changes...
2024-10-17
9:30 am
0 – Introduction
A common advice for those who want to get started with emulators development is to try implement a CHIP8 emulator.
This is a good advice, because the CHIP8 specification is quite...
2024-10-16
9:30 am
0 – Introduction
If you are tired of getting ads everywhere and want to be at peace, at least in your own home, then Pi-Hole is a godly addition to your homelab. In this article we will install Ubuntu...
2024-10-14
9:30 am
0 – Introduction
If you are looking for the core of your next project you came to the right article! In here we will review a couple of Single Board Computers for the people that think the Raspberry...
2024-10-11
9:30 am
0 – Introduction
While coding baremetal on a arduino, interrupts are a key part of any program that requires input or precise timings. In today’s article you will learn the very basics of interrupts...
2024-10-09
9:30 am
0 – Introduction
With a lot of projects, having a way to display information is vital, so we will, in this article, use one of the most popular libraries there is, with the ammount of oled displays...
2024-10-04
9:30 am
0 – Introduction
In the last baremetal arduino post we started a journey into the world of Arduinos without the IDE and their libraries. Today we will contiue that journey by learning how to do one...
2024-10-02
9:30 am
0 – Introduction
Building a simple LED blink project is often the first step into the world of embedded systems and microcontroller programming. While many projects rely on the Arduino’s more...
No posts found